S9S08SC4演示板

ladou

DEMO9S08SC4是一个低成本的开发系统，目的是演示、评估、调试飞思卡尔的MC9S08SC4微控制器。

P&E’s Embedded Multilink circuitry on the DEMO9S08SC4 board allows the processor on the DEMO9S08SC4 to be debugged and programmed via USB from the PC. In addition, the demo board can be powered using the USB bus.

特性：

       

• S08SC4, 16 TSSOP, 4K Bytes Flash, 256 Bytes RAM       
  
• Integrated P&E USB-BDM       
  
• On-board Virtual Serial Port       
  
• P&E’s Embedded Multilink circuitry populated on the bottom       
  
• SCI signals connected to P&E’s Embedded Multilink through jumpers       
  
• Power Input Selection Jumpers for selecting the input voltage source       
  
• Power Input from Embedded Multilink to LDO regulator       
  
• Power Input from DC Power Jack to LDO regulator, regulated VDD output at 5.0V       
  
• Power Input from MCU_PORT connector
  

       

• User Components Provided:
  
         
  
  • External Crystal Circuitry Layout       
    
  • LIN PHY with Molex connector       
    
  • 2 User LED’s w/ Enable       
    
  • 2 User Push Buttons w/ Enable       
    
  • 5K Ohm POT w/ Enable
    
  
  

       

• Connectors:
  
         
  
  • 40-Pin MCU I/O pass-through connector       
    
  • RS-232 Serial Port w/ DB9-F Connector       
    
  • USB Connector
    
  
  

下载连接:
S9S08SC4演示板用户指南