E8a/E8 14PIN-10PIN 转换板

weiweizsz_30000

该开发板是将14引脚?E8a (或E8)仿真器转换成10引脚。When using this product, make sure that the pin assignment of the target system is the same as the following connector pin assignment. It can be used only when the pin assignment of the 10-pin connector-side is the same.E8a (or the E8)?emulator software and Flash development Toolkit can be used for this product.  Target Devices

Family	Series	Group
M16C	M16C/Tiny	M16C/26
		M16C/26A
		M16C/28
		M16C/29
	M16C/60	M16C/62P
		M16C/6N4, M16C/6N5
		M16C/6NK, M16C/6NL, M16C/6NM, M16C/6NN
	M32C/80	M32C/84
		M32C/85
		M32C/86
		M32C/87
		M32C/88

* R8C Family?is not supported.

Pin Assignment

Connector pin assignments of this product?are shown below.

       

• 14PIN Connector [J1] (Manufacturer: Omron, Part Number: XG4C-1434)       
  
• 10PIN Connector [J2] (Manufacturer: Omron, Part Number: XG4H-1031)
  

14PIN Connector [J1] Pin Assignment		10PIN Connector [J2] Pin Assignment
Pin No.	Signal	Pin No.	Signal
1	SCLK	1	Vcc
2	GND	2	BUSY
3	CNVss	3	SCLK
4	EPM (RP)	4	RxD
5	TxD	5	CE (P1_6)
6	N.C	6	EPM (RP)
7	CE (P1_6)	7	GND
8	Vcc	8	RESET
9	BUSY	9	CNVss
10	N.C	10	TxD
11	RxD	-	-
12	N.C
13	RESET
14	GND

Connection Example