关于ucgui移植问题 @亮哥，急！急！急！

Paphiopedilum

1. ..\CORE\core_cm3.h(715): warning:  #47-D: incompatible redefinition of macro "SCS_BASE" (declared at line 687 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
   
2. ..\CORE\core_cm3.h(723): warning:  #47-D: incompatible redefinition of macro "SCB" (declared at line 935 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
   
3. ..\CORE\core_cm3.h(724): warning:  #47-D: incompatible redefinition of macro "SysTick" (declared at line 930 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
   
4. ..\CORE\core_cm3.h(725): warning:  #47-D: incompatible redefinition of macro "NVIC" (declared at line 934 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
   
5. ..\USER\stm32f10x.h(487): error:  #256: invalid redeclaration of type name "s32" (declared at line 23 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
   
6. ..\USER\stm32f10x.h(495): error:  #256: invalid redeclaration of type name "vs32" (declared at line 31 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
   
7. ..\USER\stm32f10x.h(499): error:  #256: invalid redeclaration of type name "vsc32" (declared at line 35 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
   
8. ..\USER\stm32f10x.h(503): error:  #256: invalid redeclaration of type name "u32" (declared at line 39 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
   
9. ..\USER\stm32f10x.h(507): error:  #256: invalid redeclaration of type name "uc32" (declared at line 43 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
   
10. ..\USER\stm32f10x.h(511): error:  #256: invalid redeclaration of type name "vu32" (declared at line 47 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
    
11. ..\USER\stm32f10x.h(515): error:  #256: invalid redeclaration of type name "vuc32" (declared at line 51 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
    
12. ..\USER\stm32f10x.h(519): error:  #101: "RESET" has already been declared in the current scope
    
13. ..\USER\stm32f10x.h(519): error:  #101: "SET" has already been declared in the current scope
    
14. ..\USER\stm32f10x.h(519): error:  #256: invalid redeclaration of type name "FlagStatus" (declared at line 57 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
    
15. ..\USER\stm32f10x.h(519): error:  #256: invalid redeclaration of type name "ITStatus" (declared at line 57 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
    
16. ..\USER\stm32f10x.h(521): error:  #101: "DISABLE" has already been declared in the current scope
    
17. ..\USER\stm32f10x.h(521): error:  #101: "ENABLE" has already been declared in the current scope
    
18. ..\USER\stm32f10x.h(521): error:  #256: invalid redeclaration of type name "FunctionalState" (declared at line 59 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
    
19. ..\USER\stm32f10x.h(524): error:  #101: "ERROR" has already been declared in the current scope
    
20. ..\USER\stm32f10x.h(524): error:  #101: "SUCCESS" has already been declared in the current scope
    
21. ..\USER\stm32f10x.h(524): error:  #256: invalid redeclaration of type name "ErrorStatus" (declared at line 62 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_type.h")
    
22. ..\USER\stm32f10x.h(528): warning:  #47-D: incompatible redefinition of macro "HSE_Value" (declared at line 147 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_conf.h")
    
23. ..\USER\stm32f10x.h(564): error:  #256: invalid redeclaration of type name "ADC_TypeDef" (declared at line 58 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
24. ..\USER\stm32f10x.h(663): error:  #256: invalid redeclaration of type name "BKP_TypeDef" (declared at line 154 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
25. ..\USER\stm32f10x.h(675): error:  #256: invalid redeclaration of type name "CAN_TxMailBox_TypeDef" (declared at line 163 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
26. ..\USER\stm32f10x.h(687): error:  #256: invalid redeclaration of type name "CAN_FIFOMailBox_TypeDef" (declared at line 171 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
27. ..\USER\stm32f10x.h(697): error:  #256: invalid redeclaration of type name "CAN_FilterRegister_TypeDef" (declared at line 177 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
28. ..\USER\stm32f10x.h(731): error:  #256: invalid redeclaration of type name "CAN_TypeDef" (declared at line 203 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
29. ..\USER\stm32f10x.h(758): error:  #256: invalid redeclaration of type name "CRC_TypeDef" (declared at line 213 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
30. ..\USER\stm32f10x.h(782): error:  #256: invalid redeclaration of type name "DAC_TypeDef" (declared at line 232 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
31. ..\USER\stm32f10x.h(792): error:  #256: invalid redeclaration of type name "DBGMCU_TypeDef" (declared at line 239 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
32. ..\USER\stm32f10x.h(804): error:  #256: invalid redeclaration of type name "DMA_Channel_TypeDef" (declared at line 248 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
33. ..\USER\stm32f10x.h(810): error:  #256: invalid redeclaration of type name "DMA_TypeDef" (declared at line 254 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
34. ..\USER\stm32f10x.h(895): error:  #256: invalid redeclaration of type name "EXTI_TypeDef" (declared at line 265 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
35. ..\USER\stm32f10x.h(920): error:  #256: invalid redeclaration of type name "FLASH_TypeDef" (declared at line 279 of "D:\Keil\ARM\INC\ST\STM32F10x\stm32f10x_map.h")
    
36. compiling LCDRLE16.c...
    
37. ..\ucgui\Core\LCDRLE16.c(73): error:  #20: identifier "LCD_Color2" is undefined
    
38. ..\ucgui\Core\LCDRLE16.c(74): warning:  #111-D: statement is unreachable
    
39. ..\ucgui\Core\LCDRLE16.c(74): warning:  #223-D: function "Index" declared implicitly

复制代码

移植ucgui的报错信息，我用的是3.5版本的库，网上搜到的答案是“最后在寄存器中引用了 stm32f10x_map.h以及XXX.lib.h之类的文件，如果使用V3.5的库请去掉这些，直接引用stm32f10x.h” 不知道怎么操作，求好心人

fengye5340-2725

楼主用的那个平台呢？我给你一个工程参考一下，你明显调用了一个头文件stm32f10x_map.h
先把这个头文件替换成  #include "stm32f10x.h" 试一下

Paphiopedilum

fengye5340 发表于 2014-6-4 17:02
楼主用的那个平台呢？我给你一个工程参考一下，你明显调用了一个头文件stm32f10x_map.h
先把这个头文件替换 ...

谢谢您的回复，现在好了，我先在裸机上移植的，然后才添加到ucos中！！！！