Occasionally,four motors will be out of control,which means four motors spinning at a 2/3 full speed with loud noise, when drone is flying(four motors are spinning).And the only way to stop it is power off.
Could you explain this kind of phenomenon?
in this demo, we did not use any Camera or Video functions in the existing XMC Code. The XMC is not designed to make camera/video processing
you can insert your ideas and acheive the function with your efforts, this is also the added value by you, thanks
in this demo, we only build the Interface for GPS Connection, the software still needs to be developed. Image transmission is also not developed from our side
Make sure to remove all "XMC-Bluetooth" Devices in your paired devices list before adding new ones. When the name is not "XMC-Bluetooth" you need to reconfigure the RN42 Module. Here is how to do this: http://www2.pic-upload.de/img/31 ... leconfiguration.png
Tim_Hu 发表于 2016-9-8 15:06
It is not needed to generate four PWM waves for the PINUS Boards, because they use serial protoco ...
in some case ,the daisy chain will stuck in loop, for the serial data lost one or more byte.then, the ESC,pinus,will not work until a cold power up.
can these problem be fixed in recent firmware update ?