9月8日下午14：30-16：00线上技术支持讨论专用贴（直接回复）

RuiJack

Tim_Hu 发表于 2016-9-8 16:44
It is more practical to shut-down the motors if connection is somehow lost. Thats's why it's imple ...

嗯，也是哈，还是用接收机靠谱

Tim_Hu

志凌轩云 发表于 2016-9-8 15:57
不知道是蓝牙模块不行还是手机APP不行，连上一会就会失控，下一步应该用什么样的通信模块才能保证稳定可靠 ...

Please update the firmware of the Flightcontroller as well as the Pinus ESC's. Also have a look at the newest version of the Android Application available in GitHub.

RuiJack

Tim_Hu 发表于 2016-9-8 16:48
please refer to #65

好，等你们上传，谢谢

Tim_Hu

志凌轩云 发表于 2016-9-8 15:57
不知道是蓝牙模块不行还是手机APP不行，连上一会就会失控，下一步应该用什么样的通信模块才能保证稳定可靠 ...

Please update the firmware of the Flightcontroller as well as the Pinus ESC's. Also have a look at the newest version of the Android Application available in GitHub.

Tim_Hu

wield 发表于 2016-9-8 16:07
我们团队的蓝牙连接上之后正常运行了一段时间之后会出现app端给出控制信号之后无人机没有反应，甚至会出现 ...

Please update the firmware of the Flightcontroller as well as the Pinus ESC's. Also have a look at the newest version of the Android Application available in GitHub.

Tim_Hu

无边落木的 发表于 2016-9-8 16:26
该2312电机参数 工作电压 14.8V，KV值800， 最大拉力850g

The maximum voltage the LARIX Board will accept is 3S (12.6V), 14.8V will not work directly. You can power up the ESC's and motors from the 4S lipo and you will need  to use a voltage regulator for powering the LARIX Board.

Tim_Hu

无边落木的 发表于 2016-9-8 16:26
该2312电机参数 工作电压 14.8V，KV值800， 最大拉力850g

The maximum voltage the LARIX Board will accept is 3S (12.6V), 14.8V will not work directly. You can power up the ESC's and motors from the 4S lipo and you will need  to use a voltage regulator for powering the LARIX Board.

『哟喂』LWB

您好  现在我们组的MPU9250 返回角度 不正常  请问会是传感器坏了吗？因为以前返回的角度是正常的 。